The following footprint naming conventions should be used as examples for naming SMD chip package footprints.
If you do not find an appropriate convention that matches a particular footprint type, either contact the KiCad library team or try to match a convention set by existing library components.
In the entries below, variable fields are denoted as follows:
- Fixed fields
- Mandatory fields
- Optional fields
- Prefix - Device type
- Imperial size - Imperial case size (Optional)
- Metric size - Metric case size (Optional)
- Modifiers - Modifiers to footprint if non standard (Optional)
- Options - Extra footprint options (Optional)
Example:
Notes:
The prefix is determined by the default reference designator of the device, e.g.
-
Capacitor =
C
-
Capacitor (polarised) =
CP
-
Resistor =
R
-
Diode =
D
Case size codes:
Imperial Code | Metric Code | Size Imperial | Size Metric |
---|---|---|---|
01005 |
0402 |
0.0157 in × 0.0079 in |
0.4 mm × 0.2 mm |
0201 |
0603 |
0.024 in × 0.012 in |
0.6 mm × 0.3 mm |
0402 |
1005 |
0.039 in × 0.020 in |
1.0 mm × 0.5 mm |
0603 |
1608 |
0.063 in × 0.031 in |
1.6 mm × 0.8 mm |
0805 |
2012 |
0.079 in × 0.049 in |
2.0 mm × 1.25 mm |
1008 |
2520 |
0.098 in × 0.079 in |
2.5 mm × 2.0 mm |
1206 |
3216 |
0.126 in × 0.063 in |
3.2 mm × 1.6 mm |
1210 |
3225 |
0.126 in × 0.098 in |
3.2 mm × 2.5 mm |
1806 |
4516 |
0.177 in × 0.063 in |
4.5 mm × 1.6 mm |
1812 |
4532 |
0.18 in × 0.13 in |
4.5 mm × 3.2 mm |
1825 |
4564 |
0.18 in × 0.25 in |
4.5 mm × 6.4 mm |
2010 |
5025 |
0.197 in × 0.098 in |
5.0 mm × 2.5 mm |
2512 |
6332 |
0.25 in × 0.13 in |
6.3 mm × 3.2 mm |
2920 |
7451 |
0.29 in × 0.20 in |
7.4 mm × 5.1 mm |